| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| satin rather than gloss finish on rosewood http://www-.luthiersforum.com/forum/viewtopic.php?f=10130&t=33510 |
Page 1 of 1 |
| Author: | Bill Dillon [ Tue Sep 13, 2011 7:09 pm ] |
| Post subject: | satin rather than gloss finish on rosewood |
I've completed my first guitar, a classical, except for the finish. I want to french polish it, but I want a satin rather than a gloss finish. What is my best approach to doing that? |
|
| Author: | nyazzip [ Fri Oct 28, 2011 2:43 pm ] |
| Post subject: | Re: satin rather than gloss finish on rosewood |
maybe french polish, then go over that with 0000 steel wool? that would work, but it would be a bit self defeating. if you want a real light finish/protectant, parrafin wax is nice too, just rub it on with a hair dryer, then polish it off with a clean dry cotton rag. |
|
| Author: | Chris Pile [ Fri Oct 28, 2011 2:57 pm ] |
| Post subject: | Re: satin rather than gloss finish on rosewood |
Steel wool is so 19th century. Get some fine scotchbrite, and you won't have little rusty wires all over your shop. If you MUST use wool, get brasswool. |
|
| Author: | BlueBellyGuitars [ Mon Oct 31, 2011 4:22 pm ] |
| Post subject: | Re: satin rather than gloss finish on rosewood |
Years ago I restored an old hacked up SG with urethane & steel wool. I still looks great. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|